1 5

Hobbywing

Hobbywing XRotor 65A G2 32 Bit 4in1 Electronic Speed Controller (ESC) - 30x30

Hobbywing XRotor 65A G2 32 Bit 4in1 Electronic Speed Controller (ESC) - 30x30

$89.99 USD
$118.00 USD $89.99 USD
Sale Sold out

Hobbywing XRotor F7 Flight Controller and 65A G2 4in1 ESC Tower Stack - 30x30

At Armattan Quads we only settle for the best, and Hobbywing is a perfect example!
Hobbywing products are well-known in the FPV industry for superior quality and reliability, making it a perfect fit for Armattan frames.

This listing is for the ESC only.

The ESC conveniently comes with the capacitor and battery lead pre-soldered.
If you would like to remove the battery pigtail to place it in a different position, simply cut the lead and cap off first, as close to ESC as possible, and then remove the left over from the ESC with your solder iron.

ESC SPECIFICATIONS:
XRotor 65A G2 32 Bit Electronic Speed Controller (ESC)

  • MANUAL
  • Applications - FPV drones with 30x30 stack mounting
  • High Speed - High-performance 32-bit microprocessor with a running frequency of up to 120MHz for excellent performance.
  • Third generation BLHeli_32 code - Can support up to 128KHz PWM output frequency, which can be compatible with more motors.
  • Damped light mode - Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
  • Sync Loss Prevention - The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
  • Variety of pulse support - The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
  • DShot - Signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
  • Beacon - The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.
  • Input Wires - 12AWG-130mm factory installed (Red/Black)
  • Output Wires - Solder tabs
  • Input Connectors - XT60 (w/ Wires Soldered on)
  • Out connectors - No
  • Programming - BLHeliSuite32
  • Multi-supports - Supported: DEO, Stick programming, Throttle Range Calibration, Onshot125 / 42 modes, Dshot150/300/600/1200, Timing, Motor Rotation.
  • Weight - 15g 
  • Dimensions - 52 x 42 x 6.6mm
Model
 XRotor FPV 30x30 G2 ESC 65A
SKU
 AQ-ESC002 or Hobbywing 30902064
Application FPV drones with 30x30 stack mounting
LiPo Power input 3S-6S
Cont. Current
 65Ax4
Burst Current 80Ax4
BEC Output
5V@0.6A
Throttle Calibration Supported
ESC Programming BLHeliSuite32
DEO Supported
OneShot Mode Supported
Timing Supported
Motor Rotation Supported

 

 

HOBBYWING WARRANTY POLICY:

Hobbywing policies require the end user to contact them directly for any setup questions or warranty concerns for Hobbywing products at this link:
https://www.hobbywingdirect.com/collections/service-request-form
The crew at Hobbywing North America are always super helpful, and we're confident that they'll be able to help quickly and efficiently, should they ever be needed.

View full details