Tadpole 3 DIY KIT

Write a Review
Tadpole 3 DIY KIT

Included Components

Component Link
Frame Tadpole 3
FC / ESC iFlight SucceX Micro F4 15A ESC 16x16 stack
Motors FlashHobby Arthur 1204/5200kv
FPV Camera Caddx Ant
VTx RushFPV Tiny Tank
Antenna Included with VTx
Propellers 3 Inch Triblade Gemfan Windancer 3028- 3 (2x CW, 2x CCW- Clear)

Top Lipo and Dog Bone Landing Pads


LiPo Strap

Tadpole 3 - DIY KIT 

This DIY kit ships with everything you need to build it and make it ready to bind and fly, with the exception of the battery, goggles, transmitter and a soldering station. In the drop down menus you can choose everything else you might need from the kind of receiver you need to tools to help you build it!

All DIY KITS, by default include:

  • Frame
  • Flight Controller
  • ESCs (x4 or a 4-in-1 depending on the kit)
  • Motors (4pcs)
  • FPV Camera
  • VTX (some kits have an upgradable option)
  • Antenna
  • Propellers (2x CW, 2x CCW)
  • Foam
  • Accessories that include Lipo Straps, the battery pigtail, (XT30 or XT60 depends on the kit)
  • Build materials that include solder, shrink wrap and double-sided 3M tape (when needed depending on the kit)

Containing the highest quality components and build materials, these models include the exact components that we use on our custom built models, so you know you're getting the finest product we can offer.

Because this kit will ship as soon as you order, we have limited quantities on hand at any one time.  If it is unavailable for purchase, you can keep an eye out for the next batch, or take a look at the main product on this page, where you can customize a kit.

While this comes with almost everything you need, there may be some other bits you need to pick up before you can fly your new quad to new heights.

Recommended Extras

  •   3S or 4S at 450mAh or 550mAh long LiPo Battery
  •   FPV Goggles
  •   Transmitter & battery
  •   Receiver *optional in drop down menu
  •   Tools for maintenance *optional in drop down menu
  •   Whoop AIO Board Bracket Kit *optional in drop down menu
  •   Solder station capable of going up to at least 410 C or 770 F. 
  •   Shape I solder tip (it's a tiny tip meant for precision work)
  •   Cutting tool
  •   Long-nose pliers
  •   Sharp tip small precision scissors

We also have many Painless Tutorial videos that you can utilize to help you with your build. You can check them out here!