Frigate 5

Write a Review
Frigate 5

The Frigate frame was designed to support bigger, heavier motors. While the Mongoose focuses on lightweight durability with separate ESC’s, the Frigate focuses on sheer power and 4in1 ESC’s. Along with the beefier design comes the ability to introduce longer arms. The 5” Frigate sticks with 4mm thick arms that are 11mm wide at the narrowest point.  The 5" arms also have a larger motor mounting base to protect those big 24xx and 25xx motors. The Frigate uses the same camera mount posts as the Mongoose, but they are swiveled by 180 degrees so that the mounting point is on the front of the standoff, instead of the back. The 6" has 25mm available for your stack. The base plate and top plate are shared with all models of the Frigate series. It supports 20mm or 30.5mm stacks on the 3mm thick main plate.


Carbon fiber
4x arms
1x top plate
1x bottom plate
2x cam mounting alumi standoffs
2x M3 20mm standoff
Hardware Metal
4x M3 6mm iron bolts
8x M3 12mm iron bolts
4x M3 nylocks
2x M2 5mm cuphead iron bolts (cam mount)
4x 16mm iron bolts (FC stack)
Hardware Nylon
4x M3 nylon nuts (FC stack)
4x M3 nylon 6mm standoffs (FC stack)
lipo foam pad
4x dog bone foam landing pads
1x lipo strap

Frame weight 70.5g