Badger 6 DIY Kit

Write a Review
Badger 6 DIY Kit

Included Components

Component Link
Frame Badger 6 inch
FC CL_Racing F4S (with soft-mount grommets)
Emax ECO II 2306/
1700 | 1900 | 2400kv *Optional
ESCs Armattan 30A DShot BLheli_S
FPV Camera Foxeer Predator Mini 
VTx TBS Unify Pro HV or TBS Unify Race HV
Antenna Pagoda 2
Propellers HQprop 6x3x3V1S 
Foam LiPo Pad
HD Camera pad
Landing Dogbone pads 
Accessories LiPo Strap
XT-60 Pigtail 

Badger 6 DIY KIT 

This DIY kit ships with everything you need to build it and make it ready to bind and fly, with the exception of the battery, goggles, transmitter and a soldering station. In the drop down menus you can choose everything else you might need from the kind of receiver you need to tools to help you build it!

 Containing the highest quality components and build materials, these models include the exact components that we use on our custom built models, so you know you're getting the finest product we can offer. Also, while we have stock, you can select the receiver of your choice.
Because this kit will ship as soon as you order, we have limited quantities on hand at any one time.  If it is unavailable for purchase, you can keep an eye out for the next batch, or take a look at the main product on this page, where you can customize a kit.

This DIY KIT, by default includes:

  • Frame
  • Flight Controller
  • ESCs (4pcs)
  • Motors (4pcs)
  • VTX
  • Antenna
  • Propellers (2x CW, 2x CCW)
  • Foam
  • Accessories that include Lipo Straps, the battery pigtail (XT60)
  • Build materials that include solder, shrink wrap and double-sided 3M tape (when needed depending on the kit)
While this comes with almost everything you need, there may be some other bits you need to pick up before you can fly your new quad to new heights.
Recommended Extras
  •   4S, 5S or 6S at 1300mAh to 1600mAh long LiPo Battery
  •   FPV Goggles
  •   Transmitter & battery
  •   Receiver *optional in drop down menu
  •   Tools for maintenance 
  •   Solder station capable of going up to at least 410 C or 770 F. 
  •   Cutting tool
  •   Long-nose pliers
  •   Sharp tip small precision scissors
 *Note: The the KV rating makes these motors most suitable for flying on 6s.